Product Overview & Core Architecture

 

Industrial epoxy resin insulators are high-performance electrical insulation components engineered to mechanically support energized conductors while ensuring absolute electrical isolation from grounded structures and adjacent phases.
Designed for medium-to-high-voltage switchgear, electrical distribution assemblies, and busbar support systems, these components guarantee structural stability under continuous electrical and mechanical stress.
Main Structural Components:
Epoxy Resin Insulating Body: Provides the core dielectric barrier between energized components and grounded frames. External profiles are dimensioned to meet specific insulation levels and installation environments.
Metallic Inserts & Mounting Components: Forged or machined connection points designed to transmit severe cantilever, tensile, and torsional loads from conductor assemblies to the structural enclosure.
External Creepage Surface: Surface geometries and shed profiles are optimized to lengthen leakage paths, preventing surface flashover in high-humidity or polluted conditions.

 
  • High Voltage Post Insulator
    The 35kV high-voltage post insulator (High Voltage Post Insulator) is a type of high-voltage insulating component used to support the live conductor and reliably insulate it from the grounded...
 
Types & Configurations

 

Product Configuration

Typical Application

Key Selection Considerations

Epoxy Resin Post Insulators

Switchgear and structural support assemblies

Height, mounting dimensions, voltage rating, mechanical load

Epoxy Resin Support Insulators

Busbar and conductor support frameworks

Support geometry, creepage distance, mechanical requirements

Epoxy Resin Busbar Insulators

Busbar mounting and phase-separation assemblies

Busbar arrangement, mounting interface, electrical clearance

Custom Epoxy Insulators

Non-standard electrical equipment and OEM assemblies

Customer drawings, specific dimensions, unique electrical ratings

 

Materials & Construction
 

Material integrity directly determines operational lifespan in high-stress electrical environments.

Epoxy Resin Insulating Material

Cycloaliphatic or bisphenol epoxy formulations selected for superior arc track resistance, high mechanical flexural strength, and thermal stability. Material formulation and curing parameters are strictly controlled during molding.

Metallic Inserts

High-strength brass, ductile iron (hot-dip galvanized), or stainless steel (AISI 304/316). Threads and mounting interfaces are precision CNC-machined post-casting to guarantee pitch tolerance and torque-holding capability.

Interface Bonding

Structural adhesive systems or pre-treated bonding agents create an impermeable barrier against moisture and salt-fog ingress at the metal-resin junction.

 

Technical Specifications & Standards Alignment

 

Parameter Category

Technical Specification Reference

Applicable Test / Compliance Standard

Product Type

Post / Support / Busbar / Custom Configurations

IEC / ANSI Product Standards

Rated Voltage (Ur)

12 kV – 40.5 kV (Custom options available)

IEC 62271-200 / IEEE C37.20.2

Power Frequency Withstand

Per model and insulation class (1 min)

IEC 60137 / IEEE 24

Lightning Impulse Withstand

Per model and insulation class (1.2/50 us)

IEC 60060-1 / ANSI C29.1

Partial Discharge Level

Strictly controlled limits at rated test voltage

IEC 60273 / Manufacturer Specifications

Creepage Distance

>= 31 mm/kV (Class III Heavy Pollution) or custom

IEC 60815 Series

Mechanical Load Rating

Cantilever, tensile, and torsional load verifications

IEC 60273 / ANSI C29

Operating Temperature

-40 C to +105 C

IEC 60068-2-14

 

 

Typical Applications

Medium-Voltage Switchgear: Integrated as structural insulating supports within air-insulated or gas-insulated switchgear (AIS/GIS) compartments.

 

Busbar Support Systems: Deployed to support and electrically isolate heavy copper or aluminum busbar networks from grounded enclosure walls.

 

Power Distribution Assemblies: Utilized across primary and secondary distribution equipment requiring precise dimensional and dielectric matching.

 

Custom OEM Assemblies: Tailored configurations developed precisely from customer engineering drawings and specialized project criteria.

High Voltage Post Insulator
High Voltage Post Insulator suppliers

 

Manufacturing Process & Quality Control

Production processes are designed to eliminate micro-voids, internal residual stresses, and dimensional drift.
Automated Pressure Gelation (APG): Closed-loop vacuum resin mixing and controlled injection to eliminate internal air voids and minimize partial discharge risks.


Precision Insert Placement & Machining: Metallic inserts are secured using rigid jigs during molding, followed by post-casting CNC machining to ensure exact thread pitch and perpendicularity.


Controlled Thermal Curing: Multi-stage programmable thermal cycles ensure complete polymer cross-linking and reduce internal mechanical stresses.


100% Routine & Type Testing:
Partial Discharge (PD) Testing: Verified at designated test voltages with strict background noise control.
Voltage Withstand Testing: Power frequency dry tests applied to 100% of production units.
Mechanical Proof Testing: Batch verification of cantilever and tensile load thresholds (safety factor >= 2.5x).
Traceability: Raw material batch numbers, resin-hardener ratios, and thermal cure logs are permanently recorded against unique part serial numbers.

 

Standards and Compliance Scope

Applicable standards depend on product geometry, rated voltage, and deployment context. The following standards govern our design and testing frameworks:

IEC 60273

Characteristics of indoor and outdoor post insulators.

01

IEC 60815 Series

Selection and dimensioning of high-voltage insulators for polluted conditions.

02

IEC 60071 Series & IEC 60060-1

Insulation coordination and high-voltage test techniques.

03

IEC 62271-200 & IEEE C37.20.2

AC metal-enclosed switchgear and metal-clad switchgear assemblies.

04

ANSI C29 Series

Standard specifications for electrical insulators.

05

 

 

Frequently Asked Questions

 

 

Q: What factors should be evaluated when selecting an epoxy resin insulator?

A: Selection must combine electrical parameters (rated voltage, power frequency withstand, and lightning impulse levels), mechanical constraints (cantilever and tensile loads), creepage distance requirements, and environmental conditions (altitude, pollution degree, and temperature) rather than relying solely on voltage class.

Q: What partial discharge (PD) limits are guaranteed for these insulators?

A: All epoxy insulators undergo routine PD testing. Maximum allowable background levels are strictly controlled according to the specific product design and rated voltage class to prevent long-term dielectric degradation.

Q: Are metallic inserts integrated during casting or machined afterwards?

A: Metallic inserts are accurately positioned via precision jigs during the mold-closing phase. Internal threads and critical mounting interfaces are precision CNC-machined post-casting to guarantee exact thread pitch, perpendicularity, and torque-holding capability.

Q: Can epoxy resin insulators be tailored for high-altitude or severe pollution environments?

A: Yes. For installations above 1000m or in heavy industrial/coastal environments, external shed profiles and creepage distances are scaled upward in accordance with IEC and IEEE altitude/pollution correction factors.

Q: What documentation is supplied with each shipment?

A: Every delivery includes a formal Certificate of Conformity, routine electrical test reports (withstand voltage and PD measurements), raw material composition logs, and dimensional inspection sheets mapped to unique serial numbers.

Q: Can insulators be manufactured according to custom customer drawings?

A: Yes. Custom configurations are fully supported based on your 2D/3D engineering drawings (PDF, DWG, STEP, or IGES format), electrical specifications, and mechanical loading requirements.

 

modular-1
Request a Technical Review & Quotation

To evaluate an epoxy resin insulator for your upcoming project, please submit your technical parameters to our engineering sales team:

1. Electrical Requirements: Rated voltage, power frequency withstand, impulse withstand, and max allowable PD limits.

2. Mechanical & Dimensional Specs: Required cantilever/tensile load, overall dimensions, mounting pitch, and thread specifications.

3. Operating Environment: Indoor/outdoor usage, ambient temperature range, installation altitude, and pollution severity degree.

4. Project Deliverables: Applicable standards (IEC/ANSI), 2D/3D CAD drawings (STEP/IGES preferred), estimated annual quantities, and target delivery schedule.

With abundant experience, Wenzhou Best Imp. & Exp. is one of the most professional insulator manufacturers and suppliers in China. Please feel free to buy durable insulator made in China here from our factory. Quality products and good service are available.

High Voltage Post Insulator, insulator, switchgear components
Send Inquiry
Send Inquiry